Orange Pi Plus 2E

From All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm
Jump to: navigation, search


orange pi plus 2E arcylic case
orange pi plus 2E arcylic case

Overview

Orange Pi Plus 2E

Acrylic Case

Overviews: It is a perfect case & cooling fan kit for Orange Pi Plus 2E, it only needs four screws to install your Orange Pi Plus 2E in the transparent case.

Every piece of cases has double-sided protective film, please take them off before installation.

Notice: Not include Orange Pi Plus 2E board.

Installation Guide:

  • Step1: Install the cooling fan onto the top shell.
  • Step2: Mount the bottom shell to the Orange Pi Plus 2E.
  • Step3: Plug the power cable onto the GPIO port (follow instructions on Picture)
  • Step4: Install the two side shells,then istall the front shell with network and USB openning
  • Step5: Install the top shell with colling fan.
  • Step6: Install the last shell, then you make it work as the picture below.

Orange-pi-plus-2E-arcylic-case-Install.jpg

Add your comment
All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm welcomes all comments. If you do not want to be anonymous, register or log in. It is free.