RPi IR-CUT Camera

From All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm
Jump to: navigation, search
Raspberry Pi IR-CUT Camera sku:450888

Raspberry Pi IR-CUT Camera sku:450888


The IR-CUT Camera is compatible with all generations of Raspberry Pi(Pi 3 Model B/ Pi 2B/ B+/ A+/ Zero), available at both day and night.


  • Compatible with any generations of Raspberry Pi.
  • With built-in IR-CUT, it can fix the chromatic aberration problem when use in day, and has better image.
  • Support IR night vision with the IR Fill light.
  • Support adjustable focusing.

How to toggle working mode?

Tow working mode: normal mode and night mode;

The default working mode is normal model for RPi IR-CUT.

Run command:

sudo nano /boot/config.txt

append the following line at the end of file:


save and reboot, then the camera working on night mode;

if you want to restore to normal node, only you need to comment the line:


You can program GPIO to toggle the working mode.

high - normal mode

low - night mode


  • 5 Megapixel
  • CCD Dimension: 1/4 inch
  • Aperture (F) : 1.8
  • Focal Length: 2.6mm (Adjustable)
  • Sensor best solution: 1080p
  • 4 screw holes: used for both attachment;
Support 3.3V power supply; 
Support infrared LED and fill flash.
  • Dimension: 31mm x 32 mm

Packing List

  • 1 x RPi IR-CUT Camera
  • 1 x 16 PIN FFC (reverse)


The CMOS: File:OV5647-Sensor.pdf

Add your comment
All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Anonymous user #1

4 days ago
Score 0++
Will M12 lenes work on this camera?


3 days ago
Score 0++


Sorry, we can not confirm about this.