Comments log

Jump to: navigation, search

This is a log of comments.

Logs      

 

(newest | oldest) View (newer 50 | ) (20 | 50 | 100 | 250 | 500)
  • 07:50, 25 February 2020 71.204.246.146 (talk) posted a new comment on X400 V3.0 (I can not get video signal for the Official 7" Raspberry Pi Touchscreen. What am I doing wrong?)
  • 03:17, 24 February 2020 78.49.94.237 (talk) posted a new comment on X856 (Q3: What is the difference between the X855 (older version) and X856 (updated version)?)
  • 07:05, 23 February 2020 46.5.5.154 (talk) posted a new comment on RPI HIFI AMP (So really no GPIO can be used for other purposes, for example an on/off button?)
  • 18:32, 22 February 2020 93.42.109.113 (talk) posted a new comment on X750 (I think this is a problem: ****************** Voltage: 4.23V Battery: 105% ******************)
  • 07:26, 22 February 2020 204.174.159.1 (talk) posted a new comment on Raspi UPS HAT Board (https://pastebin.com/AW1DHN46)
  • 07:17, 22 February 2020 204.174.159.1 (talk) posted a new comment on Raspi UPS HAT Board (sudo raspi-config # Enable Interfacing Options>I2C sudo apt-get install i2c-tools # Install i2c-tools nano ~/ups.py # Make a new python script ... import struct import smbus import sys import time import os lowest = 60 def readVoltage(bus): "This...)
  • 15:45, 21 February 2020 Admin (talk | contribs) posted a new comment on X735 (Hi, What version do you have? You can attach your order number and contact us with support@geekworm.com. Thanks! Best regards, Cindy/Geekworm)
  • 14:59, 21 February 2020 Admin (talk | contribs) posted a new comment on X828 (Hi, It depends on the OS.)
  • 14:55, 21 February 2020 Admin (talk | contribs) posted a new comment on X750 (Hi, All 5v output connectors are connected together and they can deliver total 8A output. Best regards, Cindy/Geekworm)
  • 14:51, 21 February 2020 Admin (talk | contribs) posted a new comment on X705 (Sorry, we will update it!)
  • 14:39, 21 February 2020 113.87.15.145 (talk) posted a new comment on X828 (In theory, you can stack as many X828s as possible, but considering the speed of USB3 and power supply issues, we recommend that you consider about 4 X828s, but you need to use 2 power adapters; generally, a 5V 4A power adapter Support the normal work...)
  • 14:37, 21 February 2020 113.87.15.145 (talk) posted a new comment on X828 (This depends on your operating system and has nothing to do with X828, which is just a hard disk-like role;)
  • 13:57, 21 February 2020 Admin (talk | contribs) posted a new comment on Armor Case (Hi, We have updated this in the Raspberry Pi 4 version. Best regards, Cindy/Geekworm)
  • 13:52, 21 February 2020 Admin (talk | contribs) posted a new comment on Armor Case (Hello friend, We are so sorry about the inconvenience, it maybe related with some individual cases, could you please contact us by email? We can help you find a solution. We have sold out many cases out but just very few such feedback. Really hope to...)
  • 06:01, 20 February 2020 134.19.179.179 (talk) posted a new comment on X450 (when I look for DAC in VOLUMIO i don't see any x450 nor subtronic. what is the correct selection to run this DAC?)
  • 00:33, 20 February 2020 188.167.253.86 (talk) posted a new comment on 7 inch HDMI TFT Capacitive Touch Screen 1024x600 SKU:408999 (please add overal dimensions, hole pattern, lcd dimensions etc.)
  • 04:41, 19 February 2020 70.122.133.192 (talk) posted a new comment on Raspi UPS HAT Board (If i disconnect both micro USB cables and have no input voltage but have a fully charged 3.7v battery connected correctly with the green light on and all four LEDs illuminated, the UPS Hat does not power on the Rasp Pi. It also doesn't appear to provid...)
  • 05:04, 18 February 2020 77.138.246.16 (talk) posted a new comment on Armor Case (The easiest way to check the fialing design is if you put a light from the side and view from the other side to see the big gap between the pad and the case. You can contact me at jagheadg@aim.com for more details. I expect the design team to fix this...)
  • 04:42, 18 February 2020 77.138.246.16 (talk) posted a new comment on Armor Case (You can contact me at jagheadg@aim.com)
  • 04:41, 18 February 2020 77.138.246.16 (talk) posted a new comment on Armor Case (Forgot to mention that the case used with PI4 is the one failing.)
  • 04:40, 18 February 2020 77.138.246.16 (talk) posted a new comment on Armor Case (I bought the armor case from Geekworm official store. After I received the Pi4 and the case, when assembled using the provided thermal pads I put a flashlight from the side of the case to check if the case is touching the thermal pads. BIG FAIL! The th...)
  • 23:04, 17 February 2020 99.110.53.3 (talk) posted a new comment on X828 (I believe usb3 is limited to 96 end points which practically becomes 32 devices. I would bet that each card takes two at a time one hub and one drive. A safe bet would be 15 cards but performance and other problems may be a bigger problem long before t...)
  • 22:55, 17 February 2020 99.110.53.3 (talk) posted a new comment on X828 (Regarding RAID: as of this posting’s date, I can confirm that Open Media Vault does not support RAID over USB. I suspect this is probably a good thing as one unplugged usb cord and you could corrupt the entire volume. I have one board being trialed...)
  • 19:28, 17 February 2020 97.102.167.163 (talk) posted a new comment on UPS2 (When will we see a revision to this board to switch power to battery when wall power is removed?)
  • 23:16, 16 February 2020 67.8.19.45 (talk) posted a new comment on X400 V3.0 (Does putting the amp in shutdown supply pre-amp output to RCA connectors?)
  • 22:49, 16 February 2020 73.22.109.4 (talk) posted a new comment on Raspi UPS HAT Board (where can I get a program to control automatic backup of data at low power and safe shutdown.)
  • 09:04, 15 February 2020 102.166.223.200 (talk) posted a new comment on EXP GDC (hallow I have a dell inspiron 15-3225 laptop, am using zotac gtx460 to connect with the exp gdc doc,now after installing everything my laptop cant power on with the exp gdc connection,, I have tried the sleep mode and also uninstalled the built in grap...)
  • 19:33, 9 February 2020 185.113.97.154 (talk) posted a new comment on 10.1 inch LCD (2560x1600) (Is it possible to get CORRECT pinout of the 30-pin connector from the screen?? There is a manual on the wiki, but it shows 45-pin connector. And when you try to match the wires to the labeled pins on the control board, the colors does not match. Red is...)
  • 00:39, 9 February 2020 73.111.103.13 (talk) posted a new comment on 3.5 inch TFT 800x480@60fps (Can't get Xorg to work. Get this error: [ 87.003] (==) No Layout section. Using the first Screen section. [ 87.003] (==) No screen section available. Using defaults. [ 87.003] (**) |-->Screen "Default Screen Section" (0) [ 87.004] (==) No...)
  • 06:05, 8 February 2020 109.101.141.242 (talk) posted a new comment on Raspi UPS HAT Board (I manage to find what U3 is :) It is IP5306 and it doesn't need the resistors)
  • 18:35, 7 February 2020 193.231.104.152 (talk) posted a new comment on Raspi UPS HAT Board (I just bought v1.1 and I notice that the 4 indicator LEDs have no limiting resistors ! I think that is a desgin flaw tkat could damage the chip (U3).)
  • 00:26, 7 February 2020 81.111.1.65 (talk) posted a new comment on X450 (is there anyway to control the volume through software mixer (second anonymous user 2)
  • 12:08, 6 February 2020 Admin (talk | contribs) posted a new comment on X705 (Only 18650 battery)
  • 12:07, 6 February 2020 Admin (talk | contribs) posted a new comment on X705 (Don't test it on RockPi 4B.. Thanks.)
  • 20:40, 5 February 2020 95.92.227.28 (talk) posted a new comment on X750 (Your support email (support at geekworm.com) is rejecting email...)
  • 10:10, 5 February 2020 95.92.227.28 (talk) posted a new comment on X750 (What is the pinout for the PWR Switch? I want to start the board from an external button; please provide details.)
  • 06:59, 3 February 2020 24.125.22.63 (talk) posted a new comment on X750 (What are the 5V OUT capacities? FWIW, my application needs about 1.5A at 5V for peripherals to the RPi. I presume that the USB ports are limited to 0.5A each, but what about the XH2.54 output connectors?)
  • 22:10, 2 February 2020 213.31.133.72 (talk) posted a new comment on X400 V3.0 (do you have the jumper correctly set on the mute pins?)
  • 06:17, 2 February 2020 71.223.233.172 (talk) posted a new comment on X400 V3.0 (RPi 4B with X400 V3.0 DAC. Choosing "ST400 Dac (PCM5122) - Amp in current version of Volumio (4.19.86v71+) adds the following line to /boot/config.txt: dtoverlay=iqaudio-dacplus but neither aplay -l or the Volumio web interface show the soundcard...)
  • 04:55, 2 February 2020 90.79.40.151 (talk) posted a new comment on How to read the battery capacity via I2C on X750&725 (I got this error while executing the script on my x725: IOError: [Errno 121] Remote I/O error am i the only one ?)
  • 17:17, 30 January 2020 62.151.22.197 (talk) posted a new comment on X828 (Do the discs go to sleep automatically when not used in a few minutes?)
  • 17:15, 30 January 2020 62.151.22.197 (talk) posted a new comment on X825 (Do the discs go to sleep automatically when not used in a few minutes?)
  • 06:16, 30 January 2020 147.147.58.205 (talk) posted a new comment on X400 V3.0 (You need a jumper on the mute)
  • 06:15, 30 January 2020 147.147.58.205 (talk) posted a new comment on X400 V3.0 (My system cuts out when I raise the volume over a certain level - it is not particularly loud. This does not happen all of the time, just some of the time, but once it starts happening it will continue to do that. rebooting seems to work. Any idea?)
  • 07:59, 29 January 2020 202.161.69.18 (talk) posted a new comment on X750 (Can you give more details on the PH2.0 4-pin External PWR Switch connector please. What is the recommend wire to use this. Where is the information and description of the function of each of the pins?)
  • 08:16, 25 January 2020 77.166.7.128 (talk) posted a new comment on X700 (Can I still use the 40 pin header for additional hardware? Like a NRF24L01 receiver board (using pins 17 - 24)?)
  • 23:42, 24 January 2020 76.183.122.253 (talk) posted a new comment on Armor Case B (What is the total height of Raspberry Pi with case? 23mm?)
  • 14:20, 24 January 2020 95.90.203.143 (talk) posted a new comment on X735 (My fan runs allways in fullspeed, why the auto cooling dosn't work?)
  • 05:58, 24 January 2020 99.132.142.211 (talk) posted a new comment on Raspi UPS HAT Board (Is there a way to replace the switch via commands or pin on the GPIO?)
  • 21:17, 23 January 2020 99.132.142.211 (talk) posted a new comment on Raspi UPS HAT Board (Is there a way to provide power via the GPIO (not through the microUSB)?)
(newest | oldest) View (newer 50 | ) (20 | 50 | 100 | 250 | 500)