X150

From All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm
Jump to: navigation, search


Raspberry Pi 9-port USB 2.0 High Speed hub
Raspberry Pi 9-port USB 2.0 High Speed hub
Raspberry Pi 9-port USB 2.0 High Speed hub

Overview

This is a 9-port USB hub to solves the problem of insufficient USB port on the Raspberry Pi, and can be well assembled with the Raspberry Pi. At the same time, it provides two ways to power the Raspberry Pi.

Features

  • 9-port USB 2.0 High Speed hub for Raspberry Pi
  • Adopts Multiple Transaction Translator (MTT) architecture to explore the maximum possible throughput
  • Max total transmission speed up to 480 MBps
  • Fully compliant with Universal Serial Bus Specification Revision 2.0 (USB 2.0)
  • Green LED indicators for downstream port status
  • Power the Raspberry Pi via JST XH2.54 connector or USB port
  • Can be firmly attached under Raspberry Pi
  • Self-Powered / bus-Powered

Two-power-type.jpg

Packing List

  • 1 x X150 Board
  • 1 x Usb connector
  • 1 x USB 2.0 cable
  • 1 x 2P Power cable

All-accessories.jpg

User Manual

Add your comment
All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #1

24 days ago
Score 0++
What is the power input requirements for the hub? I see a 5v printed on the board, but whats the amperage, and is another piece required for purchase?

Admin

10 days ago
Score 0++
Hi, The X150 board is powered by Raspberry Pi, and you can Power the X150 via JST XH2.54 connector or USB port as the photo show above. Best regards, Cindy/Geekworm