X400

raspberry pi hifi audio board x400

raspberry pi hifi audio board x400

Overview

This product is be sold out, now the new version v3.0 is released, please refer to X400 V3.0.

This is the raspberry pi hifi audio expansion board, and it use TI PCM5122 chip, can bring you high quality music enjoyment.

Match Power Supply

Please refer to DC 19V 2A Power Supply

KEY FEATURES

Input Voltage:

• 6V to 24Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi

Audio:

• Full-HD audio – up to 24-bit/192kHz playback
• Class leading audio; 112db SNR, and THD of 0.0019%
• Audiophile TI Burr Brown 32-bit/384kHz DAC (TI PCM5122)
• Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
• Integrated hardware volume control
• Mute can be enabled / disabled via jumper
• Built in High quality audio headphone amplifier (TI TPA6133A)
• Earphone AMP can be enabled / disabled via jumper
• Built in High quality Class-D stereo audio amplifier (TI TPA3118D2)
• Up to 2 x 20W into 4 ohm
• AMP can be enabled / disabled via jumper
• Phono/RCA connectors
• 3.5mm stereo audio jack
• Speaker terminals

Wireless:

• Built in IR sensor (38KHz)

Misc:

• Power output socket
• DIP switch to remove connection from RPi’s pin header
• Directly connected on top of the Raspberry Pi using the board GPIO header pins
• No wiring nor soldering is required
• Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
• Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!

User Manual

• Official website

For Volumio (On volumio 2.444)

Save & reboot

Now you can enjoy your music;

FAQ

1.Can you use the RCA's as inputs?

Yes, you can try to use the RCA as input in theory. but pls put the DAC (PCM5122) in "mute" mode. (But we do not suggest you use the RCA as input, if so, the DAC will be no output.)

2.Does this X400 V3.0 have analog input?

No, when you use X400 v3.0 with Raspberry Pi , there is no analog input, but if you do not use Raspberry Pi, the RCA port can be used as analog input.

Add your comment

All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #4

9 days ago

Score 0

How do i setup a remote control to use with this board??

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

9 days ago

Score 0

Hello,

There is no information show this board can be remote control.

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #3

2 months ago

Score 0

I am unable to get sound from the Speaker terminals. I followed the setup instructions. The amp is getting power (it gets plenty warm) and it works via the headphone jack, but with two 4 ohm 20 W speakers hooked to the Speaker terminals there is no sound from either.

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

2 months ago

Score 0

Hello, It is hard to confirm the problem here, please send us the details include the order number and item link and the set up deatils to our email: support@geekworm.com, we will help you about this, thank you! Best regards,

Geekworm

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

4 months ago

Score 0

I just received my X400 board, but the power adapter I planned to use with it is too large.

What is the correct connector for making a 12 volt connection to the X400? Do I understand correctly that the 12 volt connection will power the entire system?

Stalled without power. Please let me know the correct connector for the 12 volt system.

Thank you,

Steve

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

3 months ago

Score 0

Hello friend, The X400 need to use a DC Jack: 5.5x2.5mm port power supply, we have a recommedned power supply you can check what it look like: https://geek...ansion-board If any more questions, you can also contact us by email. Best regards,

Geekworm

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #2

4 months ago

Score 0

So, given that I want to use this unit to drive a pair of speakers, I understand that I want to use the jumpers to turn-off the headphone and RCA jack systems. Is that correct?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

3 months ago

Score 0

Hello friend, We are no sure about this, maybe you can have a try. If any questions, please contact us by email. Best regards,

Geekworm

Permalink

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

4 months ago

Score 0

It says that this board supports full HD audio. Does it support Dolby 7.1 or Dolby True HD, DTS 7.1 or DTS-HD Master Audio?

Thank you

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Admin

4 months ago

Score 0

Hello sir, Sorry, this x400 board does not support Dolby 7.1 or Dolby True HD, DTS 7.1 or DTS-HD Master Audio. Best regards,

Geekworm

Permalink