X600

From raspberry pi wiki
Jump to: navigation, search
X600
X600
X600

Overview

SupTronics X600 Expansion Board for Raspberry Pi 2 Model B / Raspberry Pi B+

FEATURES

Input Voltage:

  • 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi and SATA device

Audio & Video:

  • Allows you to extract audio signals from HDMI of your Raspberry Pi
  • Converts HDMI audio to digital optical or Coaxial or stereo RCA analog
  • The SPDIF optical or Coaxial audio output supports all audio formats up to 5.1CH Dolby Digital 5.1CH / AC3 & DTS 5.1CH audio
  • Extract digital 2CH PCM stereo audio signal from the HDMI input and convert it to 2CH analog stereo output through its RCA style L/R analog output or earphone jack
  • Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH
  • Maintains surround format when converting to digital optical audio
  • Supports high definition input up to 1080p@(24/60)Hz, output resolution follows input
  • Supports HDMI signal amplification and equalization output for repeater function
  • HDMI output supports all audio formats including more advanced Dolby Digital Plus, PCM5.1CH and beyond

SATA:

  • Allows you to connect SATA devices to your Raspberry Pi

Wireless:

  • Built in IR sensor (38KHz)

Misc:

  • Power output socket
  • Directly connected on top of the Raspberry Pi using the board GPIO header pins
  • No wiring nor soldering is required
  • Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
  • Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!

Dimensions:

  • 85 x 56mm (Same size as Raspberry Pi)

Packing List

  • 1 x Expansion board
  • 1 x HDMI to VGA connector
  • 1 x USB male to male connector
  • 1 x Pack of install screws

x600

Document

Official site: http://www.suptronics.com/Xseries/x600.html

Add your comment
raspberry pi wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.