X730

From All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm
Jump to: navigation, search
X730
X730
X730


Overview

The X730 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header.It provides intelligent and safe power management, safe shutdown and full poweroff through software, an automatic temperature controlled fan which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments.The X730 also reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications.

X730

X730

X730

X730

Features

Operating System

  • Raspbian Stretch
  • Safe shutdown function tested for Raspbian, other operating systems to be tested and advised

About Power Management

  • Intelligent and safe power management
  • Press the power button to turn on
  • Press the button and hold for 1~2seconds to reboot
  • Press the button and hold for 3~7seconds for safe shutdown
  • Press the button and hold for >8seconds to force shutdown
  • Supports safe shutdown and full poweroff through software
  • On-board LED shows the status of power on, reboot and shutdown
  • Powers the Raspberry Pi via the 40-pin header - no additional cabling required

About Cooling Fan

  • Dual trip point temperature controlled cooling fan
  • Auto-Control the fan for Cooling / quiet Operation
  • Board tempeature <18℃ - Fan off
  • Board tempeature >18℃ - Fan running low
  • Board tempeature >38℃ - Fan running at full speed
  • On-board LEDs show the status of fan running low and high
  • No driver and setting required

Others

  • Reserved 40-pin stackable Header for Add-On Boards
  • Works with all current models of the Raspberry Pi using a 40 pin header
  • On-board micro-USB socket for power input - No need to change the power adapter

Document

We test this shell script base official Raspbian '2018-11-13-raspbian-stretch.img' version;

wget https://raw.githubusercontent.com/geekworm-com/x730-script/master/x730.sh
sudo chmod +x x730.sh
sudo bash x730.sh
printf "%s\\n" "alias x730off='sudo x730shutdown.sh'" >> ~/.bashrc
sudo reboot
Add your comment
All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #2

one month ago
Score 0++
What is the cost of these and how does one place an order?

Anonymous user #1

8 months ago
Score 0++
I want to have the x820 board and metal case. I also want to use this X730 board for the safe shutdown, is it going to fit in the x820 metal case? How should I connect the x820 board to the x730?

Admin

8 months ago
Score 0++

Hello sir, The X730 board is not suggested to use with X820 board. As it is hard to solve the power problem, and also it is not suitable to install in X820 case, Best regards,

Cindy/Geekworm

Admin

6 months ago
Score 0++

Hello sir, we will release the X735 and the matching case for X820+x735 soon.

Harry /Geekworm