Difference between revisions of "7 inch HDMI TFT Capacitive Touch Screen 1024x600 SKU:408999"

From Geekworm
Line 19: Line 19:
 
* The power consumption: When 5V power, 490mA with backlight on. 90mA with backlight off
 
* The power consumption: When 5V power, 490mA with backlight on. 90mA with backlight off
  
== User Guide ==
+
== User Guide (new)==
 +
This method  is only suitable for Raspbian OS
 +
 
 +
Please use it as follow:
 +
* Download the latest image on Raspberry Pi Official website:
 +
https://www.raspberrypi.org/downloads/
 +
* Burn the image into TF card,  and open config.txt  file in your PC computer:
 +
* Modify  the file config.txt; Append the following lines at the end of the file.
 +
'''For 7 inch HDMI LCD (B)(800 x 480):'''
 +
max_usb_current=1
 +
hdmi_group=2
 +
hdmi_mode=1
 +
hdmi_mode=87
 +
hdmi_cvt 800 480 60 6 0 0 0
 +
 
 +
'''For 7 inch HDMI LCD (C)(1024 x 600):'''
 +
max_usb_current=1
 +
hdmi_group=2
 +
hdmi_mode=1
 +
hdmi_mode=87
 +
hdmi_cvt 1024 600 60 6 0 0 0
 +
 
 +
* Insert the Micro SD card into Raspberry Pi board, and power on to try it.
 +
 
 +
== User Guide (old)==
 
* Use the full firmware with driver for this LCD: [[Install the image to your raspberry pi]]
 
* Use the full firmware with driver for this LCD: [[Install the image to your raspberry pi]]
 
* Install driver to this LCD: [[Install driver to 7 inch Cap Lcd 1024*600|User manual]]
 
* Install driver to this LCD: [[Install driver to 7 inch Cap Lcd 1024*600|User manual]]

Revision as of 15:10, 26 April 2016

Introduction

1.jpg
2.jpg

7" HDMI TFT Capacitive Touch Screen for Raspberry Pi 2 / Model B / B+ / B , for beaglebone black and banana pro.


New LCD version is out. Please refer to here to judge your LCD version.

http://www.spotpear.com/learn/EN/raspberry-pi/Raspberry-Pi-LCD/Raspberry-Pi-7inch-Capacitive-HD-LCD-UserGuide-en.html

Features

  • Compatible with Raspberry Pi 2 module B/B+/A+/B
  • For Raspberry Pi, you can run Raspbian and Ubuntu( Ubuntu can only run at Raspberry Pi 2 modle B)
  • Compatible with BB Black and Banana Pi/Pro
  • Can also run Windows at your PC (Touch can't work)
  • USB touch and HDMI display don't occupy any GPIO;
  • The power consumption: When 5V power, 490mA with backlight on. 90mA with backlight off

User Guide (new)

This method is only suitable for Raspbian OS

Please use it as follow:

  • Download the latest image on Raspberry Pi Official website:

https://www.raspberrypi.org/downloads/

  • Burn the image into TF card, and open config.txt file in your PC computer:
  • Modify the file config.txt; Append the following lines at the end of the file.

For 7 inch HDMI LCD (B)(800 x 480): max_usb_current=1 hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_cvt 800 480 60 6 0 0 0

For 7 inch HDMI LCD (C)(1024 x 600):

max_usb_current=1
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
  • Insert the Micro SD card into Raspberry Pi board, and power on to try it.

User Guide (old)

Key Parameters

LCD Type HDMI TFT
LCD Interface USB
Touch Screen Type Capacitive
Touch Screen Controller STM32-103
Colors 65536
Backlight LED
Resolution 1024*600 (Pixel)
Aspect Ratio 4:3
SPI Diver Speed 16Mhz
Backlight Current TBD
Operating Temp. (℃) TBD

Packing List

  • 1 x Touch Screen
  • 1 x HDMI Cable (50cm)
  • 1 x USB Cable (80cm)