Difference between revisions of "LVDS To HDMI Adapter Board"
(→FAQ) |
(→FAQ) |
||
Line 34: | Line 34: | ||
2. If yes, you could weld a 0ohm-0603-±5%-1/10W resistance on R28 position. | 2. If yes, you could weld a 0ohm-0603-±5%-1/10W resistance on R28 position. | ||
+ | [[File:LVDS to HDMI Board (New Version).jpg]] | ||
<comments/> | <comments/> |
Latest revision as of 10:34, 12 August 2019
Contents
Notice
- This board is limited to LVDS output, the resolution must be the VESA standard, and the driver board should be at least V59 grade, or the driver board is not available.
- Pin Connection: 2 x 40Pin
- Because it is the DIY product, so sometimes there may be the compatibility problem. When it shows no signal or no sound, it may be the compability problem.
- It will have any compability problem if connect to 4K TV.
Packing List
1 x LVDS To HDMI Adapter Board
There are two kinds of LVDS input (Optional)
- Double 8, Support 1080P (1920*1080P) (default)
- Single 8,Support 720P/768P/960P etc. (Opitional)
The procedure of the two adapter boards is different, please leave your message for which one you need.
Board Design
Document
File:S-LH1080P-AUDIO-V17-Spec-20180504-1.pdf
FAQ
Q: Is there a way to reflash the firmware on this board so it turns the Double 8 to a Single 8?
A:
1. Please confirm your board is the new version according to the picture;
2. If yes, you could weld a 0ohm-0603-±5%-1/10W resistance on R28 position.
Enable comment auto-refresher
Anonymous user #15
Permalink |
Anonymous user #14
Permalink |
Anonymous user #13
Permalink |
Anonymous user #11
Permalink |
Anonymous user #12
Admin
Anonymous user #11
Anonymous user #10
Permalink |
Admin
Anonymous user #8
Permalink |
Anonymous user #9
Anonymous user #7
Permalink |
Admin
Anonymous user #6
Permalink |
Admin
Anonymous user #5
Permalink |
Admin
Anonymous user #3
Permalink |
Admin
Anonymous user #4
Admin
Anonymous user #1
Permalink |
Anonymous user #2