Supstronics X205 Expansion Board for Raspberry Pi 2 B+ (SKU:411771)

From All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm
Jump to: navigation, search

Supstronics X205 Expansion Board for Raspberry Pi 2 Model B / Raspberry Pi B+


1.Input Voltage 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi  RS232 serial communications
2. Control the Raspberry Pi over RS232 or connect to external serial accessories  RS485 serial communications 
3. You will be able to have a communication port for your field bus directly connected to your RPi!
4. It will allow up to 32 devices to communicate through the same data line over a cable length of up to 4,000ft with a maximum data rate of 10Mbit/s.
5. 3.5mm stereo audio jack
6. Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2) Wireless 
7. WiFi (IEEE 802.11b/g/n) with external antenna 
8. IR sensor (38KHz) USB Storage 
9. Self-powered USB hub with 3 ports  Real-time clock (RTC) 
10. Based on DS3231SN with included CR2032 battery GPIO Control 
11. 8-channel Darlington driver chip  (ULN2803) allowing to control electronic circuits which require more current  Misc 
12. Power output socket
13. Camera flex slot so camera can still be used with the expansion  board attached
14. DIP switch to remove connection from RPi’s pin header
15. Directly connected on top of the Raspberry Pi using the board GPIO header pins 
16. No wiring nor soldering is required 
17. Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards 
18. Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!

Download Link [[1]]

Packing List

  • 1 x Expansion board
  • 1 x Pack of plastic screws
  • 1 x USB adapter
  • 1 x 2.4GHz Wi-Fi antenna