Difference between revisions of "UPS2"

From All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm
Jump to: navigation, search
(Features)
Line 17: Line 17:
  
 
==Packing List==
 
==Packing List==
 +
* 1 x UPS HAT 2 Board
  
 
==Document==
 
==Document==
 
Please refer to github: https://github.com/geekworm-com/UPS2
 
Please refer to github: https://github.com/geekworm-com/UPS2
  
 
+
[[File:UPS2-BCM-GPIO.png]]
  
 
<!--增加评论功能! -->
 
<!--增加评论功能! -->

Revision as of 21:40, 10 September 2019


Overview

After more than 2 years, we update and release ups 2 based on UPS1

Features

  • Raspberry Pi standard HAT size, all components under the PCB board, and the use of 5mm high female socket, can reduce the thickness of the expansion board, easy to put into the shell. You can use the header to increase the height.
  • Equipped with a custom long header (This is optional accessories)
  • Supports dual power supply of TYPE-C and Mirco USB.
  • Type-C power supply interface is compatible with a variety of fast charge standard DP2.0/QC3.0/QC2.0 (5V/3A), charging current is 1A ~ 3A configurable (default is 2A, short-circuit solder joint up to 3A)
  • Up to maximum 3A current output;
  • Long press power button 2 seconds to power on / off
  • With 4 LED power indicator (short press power button to view battery capacity)
  • Supports AUTO POWER ON function (need to select the AUTO UPS switch to ON)
  • Use TI battery monitoring IC with patented Impedance Track algorithm
  • Support I2C communication to read battery capacity, voltage, charge status and battery life (please refer to viewinfo.py)
  • With charge and discharge protection and overheat protection

Packing List

  • 1 x UPS HAT 2 Board

Document

Please refer to github: https://github.com/geekworm-com/UPS2

UPS2-BCM-GPIO.png

Add your comment
All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #3

17 hours 54 minutes ago
Score 0++

Hi. There is an error on the "raspberry pi ups hat 2 size" picture. I believe we should read 5.6 cm instead of 5.1 cm.

What's the height of the board (each side and total)?

Anonymous user #2

one day 6 hours 21 minutes ago
Score 0++
Is there a way to hack it to support LiFePO batteries?

Anonymous user #1

6 days ago
Score 0++
You might provide some dimensions for the board?

Admin

2 days ago
Score 0++

Hi, We have updated the PCB layout, please refer to:

raspberrypiwiki.com/index.php/File:UPS2-PCB-LAYOUT.png