Difference between revisions of "X856"

From All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm
Jump to: navigation, search
(Created page with "{{GD Template Impl}} ==Overview== ==Features== {| class="wikitable" |- | For Use With || Raspberry Pi 4 Model B |- | Operating System || - All Raspberry Pi operating systems...")
(No difference)

Revision as of 11:22, 4 December 2019


Overview

Features

For Use With Raspberry Pi 4 Model B
Operating System - All Raspberry Pi operating systems
Key Features
  • Ideal storage solution for Raspberry Pi 4 - mSATA SSD Shield
  • Supports up to 1TB mSATA solid-state drive (SSD)
  • Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
  • USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4
  • Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see notes)
  • LED red indicator indicates powered status and blue indicator indicates drive status
  • USB bus-powered
  • Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed
  • Mounting holes and standoffs provide mechanical stability of the Raspberry Pi and X825 assembly
  • Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
  • Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management
  • Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
  • Fully compatible with X725 for uninterruptible power supply (18650 UPS, 5.1V 8A, WOL)
Power Supply I/O ports
  • - Power supply: 5Vdc +/-5% , Powered via Pi's USB port or XH2.54 connector
  • 5Vdc via micro-USB socket, Extra power for SSD
  • - Ports & Connectors: USB socket - USB 3.0 type A x1
  • 52P Mini PCI-E mSATA slot x1
  • - PCB Size 85mm x 56mm
Notes

- A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition - WARNING: Do not power your Raspberry Pi via the Pi's 40-pin header and type-C socket at the same time.

Packing List

  • X856 mSATA SSD shield x 1
  • USB3.1 jumper x 1
  • Screw M2.5 *6mm x 6
  • Spacer M/F M2.5 *12mm x 4
  • Spacer F/F M2.5 *8mm x 4

Document

Software Installation, please refer to: How to Run Raspberry Pi 4 or 3 Off an SSD or Flash Drive

FAQ

Add your comment
All for Raspberry Pi, Arduino, Lattepanda, Orange Pi, Pine64 | by Geekworm welcomes all comments. If you do not want to be anonymous, register or log in. It is free.